TRI-reinforcement for lintels of the openings
The tri-armature is used for reinforcing various ceiling structures, lintels of openings, supporting beams, etc.
The tri-fixture is used as an intermediate limiter for fixing a certain distance between the reinforcing bars.
Particularly suitable for high loads. Ensures firm, stable fixing of the reinforcement during concrete placement.
The product complies with the European standard. EN 10080:2006 "Steel for concrete reinforcement. Weldable reinforcing steel. General".
Can be ordered galvanised.
Tri reinforcements (reinforcement frame) |
||
H2 |
Overall height |
70-300 mm |
H1 |
Designed height |
H1+ 5 mm |
B1 |
Designed width |
70-90 mm |
1 |
Upper rebar |
5 -14 mm |
2 |
Diagonal rebar |
5 – 7 mm |
3 |
Lower rebars |
5 – 14 mm |
Ps |
Diagonal step |
200 mm |
L |
Maximum length |
1.000 mm |
U1 |
Diagonal rebar projection |
1-4 mm |
U2 |
Diagonal rebar projection |
1-4 mm |
Load resilience at a steady placement of the Tri reinforcement
Distance between tri reinforcements |
Load resilience |
Consumption per 1m2 |
1 m |
120 kg/m2 |
1.00 jm/m2 |
0.8 m |
150 kg/m2 |
1.25 jm/m2 |
0.6 m |
200 kg/m2 |
1.10 jm/m2 |
0.4 m |
300 kg/m2 |
2.50 jm/m2 |
Tri reinforcement (distancer between the meshes)
Tri reinforcements (reinforcement frame) |
||
A |
Designed height |
40-300 mm |
B |
Overall height |
A + 7 mm max |
C |
Bearing width |
70-100 mm |
D1 |
Upper rebar |
4-8 mm |
D2 |
Diagonal rebar |
4-8 mm |
D3 |
Lower rebars |
4-8 mm |
Diagonal step |
200 mm |
|
L |
Length |
2000 mm |
H=125mm, 8/5/8mm, L=3000mm
H=120mm, 12/6/12mm, L=3000mm